5 1
5/ 5
Tax included

X-DIMMER - Allows to control the light intensity with a push button (stand alone or via IPX800 V4 or V5).



The 4 channels allow to control 4 lights zone independently in stand alone mode and/or centralized with IPX800 V4 or V5 (130W max per channel, 530W tot).

Control +/- of luminosity with a push button. Short Push = ON/OFF / Long Push = dimming.

Compatible with all kind of "dimmable" lamps. You don't need to add a charge to control led lamps.

Each channel can be set in trailing or leading edge (cf. Manual).

X-DIMMER is 100% autonomous and can works with or without IPX800 V4 or V5.

Easy install in few minutes:

  1. Connect lamps on differents channels you want to use
  2. Connect the EBX Bus to the IPX800 V4 (if used)
  3. Enter the X-Dimmer's unique identification number in the IPX800 V4 or V5
  4. Connect the X-DIMMER to the main power (100 to 240 Vac 50 -60 Hz)
  5. The X-Dimmer is automaticaly recognized and operative.

The X-DIMMER is natively deportable until 200m from IPX800 V4 due to 2 wires EBX bus.

Technical characteristics:

  • 4 channels 130W max. / channel.
  • Extension combinable until 24 channels ( 6 extensions).
  • Power supply 100 to 230V-50Hz - 60 Hz
  • Consumption: 2 Watts (standby).
  • Thermal protection.
  • Communication on 2 wires EBX Bus (until 200m).

2 Years Warranty

Made in France

37 Items

Specific References


Mode d'emploi X-Dimmer

Notice d'utilisation du X-Dimmer

Download (1.01M)

You might also like

If you need any urgent assistance, please call our hotline ( 0899.49.05.15 (1€99 / Call)